Failure is Not an Option: Air Barrier Continuity Strategies for Storefront and Curtain Wall Systems

By clicking "Register", you acknowledge that you have read BNP Media’s Privacy Policy, agree to its terms, and consent to allow BNP Media to use your information consistent with the Privacy Policy. You agree your information submitted will be shared with the sponsor(s) of the webinar. To read our Privacy Policy, please click here
Webinar On-Demand
Sponsored by Air Barrier Association of America
Presented by Andrew Dunlap, AIA, CDT, NCARB, LEED AP

Learning Objectives:

  1. Articulate how transitions impact building enclosure performance through real life experiences in regards to energy loss, building performance and the sustainability of the system.
  2. Correctly identify and prioritize critical details during the construction document phase to ensure an integrated approach is taken to heat, air, water and vapor control.
  3. Assess each detail for storefront and curtain wall in regards to impacts of the four control layers and understand the various options for designing details for a variety of roof, wall and window assemblies.
  4. Through the use of real life case studies and photos, plan out the proper sequence of construction and identify quality control methods in construction document review to provide corrective action.

Credits:

HSW
1 AIA LU/HSW
IACET
0.1 IACET CEU*
IIBEC
1 IIBEC CEH

Critical details that typically cause building performance related issues will be focused on one of the largest failures of building enclosures: wall to window connections specific to curtain wall systems and storefronts. A step-by-step look at each critical detail in regards to sequence of construction and the various connections to ensure airtight/watertight and thermally protected details. Real life photos and job conditions will highlight the realities of the construction process to show typical errors found and how those errors can be addressed correctly.

Failure not Option

Photo courtesy of SmithGroup


Andrew

Andrew Dunlap’s AIA, CDT, NCARB, LEED, primary work experience is focused on the analysis and development of building enclosure systems including wall cladding assemblies, air barrier systems, roofing, skylights, fenestration systems and waterproofing. Specializing in the energy and hygrothermal evaluation and analysis of wall, fenestration, and roof systems, Andrew utilizes a number of advanced computerized analysis and simulation tools to perform his work. He received his B. Arch, B.S. in Mathematics, and M. Arch degrees from the University of Detroit Mercy. Andrew is also active participant in the design and construction community, providing presentations and publications to several industry organizations.

 

Air Barrier Association of America The Air Barrier Association of America (ABAA) is a national, trade association that consists of a wide cross section of members in the building enclosure industry. ABAA is the national voice of the air barrier industry and has raised the level of quality in the industry through a Quality Assurance Program and is active in the areas of research, education, standards development, building codes and technical resources for the air barrier industry.

 

Originally published in November 2021

Notice

Academies