Designing For Fire Resistance With Gypsum Panel Systems

Improving building safety through the use of fire rated assemblies
This course is no longer active
[ Page 6 of 7 ]  previous page Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 next page
Advertorial course provided by USG Corporation
Robert C. Grupe, CSI, Director Architectural and Technical Solutions, USG C

Steel Stud Drywall Partition Screw Spacing and Location

It should be noted that Underwriters Laboratories provides technical assistance in the interpretation of conditions that are not specifically tested. This assistance is based on the enormous amount of data available to UL on a variety of materials and systems. Many of these situations may have already been reviewed by UL or may have been tested by UL under the so-called "Special Services Investigations."

Examples of these would be the evaluation of corner details that do not specifically fall under the scope of ASTM Standard E119 or the installation of recessed electrical panels in fire-rated walls. Architects and contractors should consult with the manufacturer of the gypsum panels being used in the specific project for assistance regarding special situations.

click image to view larger

USG Corporation is a Fortune 500 company with subsidiaries that are market leaders in their key product groups: gypsum wallboard, joint compound and related gypsum products; cement board; gypsum fiber panels; ceiling panels and grid; and building products distribution.

www.usg.com

 

[ Page 6 of 7 ]  previous page Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 next page
Originally published in Architectural Record.
Originally published in October 2006

Notice

Academies