Fire Resistive Expansion Joint

Keeping fire barriers uninterrupted
By clicking "Register", you acknowledge that you have read BNP Media’s Privacy Policy, agree to its terms, and consent to allow BNP Media to use your information consistent with the Privacy Policy. You agree your information submitted will be shared with the sponsor(s) of the webinar. To read our Privacy Policy, please click here
Webinar On-Demand
Sponsored by Inpro
Moderator: Peter J. Arsenault, Panelists: Matthew Fisher, David Del Vecchio, Miguel Rodriguez

Learning Objectives:

  1. Identify the role that building construction joints play in a well-designed building and the code and life safety issues associated with making those joints fire resistive.
  2. Recognize the common types of fire resistive expansion joint filler systems that are available as solutions to meet safety requirements.
  3. Review the practical aspects of designing and constructing fire resistive expansion joints in different building situations and conditions.
  4. Determine ways to incorporate the principles and topics presented into architectural design and documentation as evidenced in project case studies.

Credits:

1 AIA LU/HSW
1 AIBD P-CE
0.1 IACET CEU*
AAA 1 Structured Learning Hour
AANB 1 Hour of Core Learning
AAPEI 1 Structured Learning Hour
SAA 1 Hour of Core Learning
MAA 1 Structured Learning Hour
NSAA 1 Hour of Core Learning
OAA 1 Learning Hour
NLAA 1 Hour of Core Learning
NWTAA 1 Structured Learning Hour
 
This course can be self-reported to the AIBC, as per their CE Guidelines.
This course is approved as a Structured Course
Approved for structured learning
This course is approved as a core course
Approved for Core Learning
Course eligible for OAA Learning Hours
This course is approved as a Core Course
Course may qualify for Learning Hours with NWTAA
This course can be self-reported for Learning Units to the Architectural Institute of British Columbia

Fire separations are required in buildings for good reasons—there are too many tragic examples of preventable death and injury from fire and smoke in buildings. Architects are well aware of the “passive” separation approach of using compartmentalized spaces that are enclosed on all horizontal and vertical sides with fire rated construction. The main fire barrier systems are fairly well understood using non-combustible construction of protected steel, concrete, gypsum board, etc. A sometimes overlooked design detail, however is addressing the seams or joints of the walls, floors, and roof. In particular, large buildings require expansion joints that are often located in fire rated construction assemblies that separate occupied spaces from each other, from vertical shaft ways, or from adjacent tenancies. The apparent paradox of providing an intentional break in the structure to allow for normal expansion and contraction while still maintaining a fire rating is addressed by providing an expansion joint that also serves as a fire barrier.

This course will review the issues surrounding expansion joints and fire safety. It will then go on to explore the three common types of fire barrier expansion joint systems and the suitability of each for different conditions. Specifically, compression systems, fire rated foams, and fire blankets will be looked at. Architects will discuss the practical design and construction aspects of working these into buildings and review examples.

Fire Resistive

Photo courtesy of Inpro Corporation



Arsenault

Peter J. Arsenault, FAIA. Mr. Arsenault is a registered architect, sustainability consultant, author, and speaker based in Greensboro, North Carolina. A 1977 graduate of Syracuse University, his multi-faceted work has focused on principles of high performance buildings including energy, code compliance, safety, and sustainability.


Fisher

Matthew Fisher is the Senior Product Manager for JointMaster® Expansion Joint Systems, a division of Inpro®. He has 20 years of experience in architecture, construction management, and building materials management. Trained and serving six years in practice as an architect, Matthew knows the design process and the importance of design intent. His seven years in construction management gave him a depth of expertise and understanding of the rigors and pressures of building projects on time and budget. For the past six years, he has been the product manager for JointMaster, and he enjoys the ability to continue his learning by working with architects and contractors in the field. Matthew holds a Bachelor of Arts in architecture from the University of Wisconsin-Milwaukee. He is certified as a LEED Accredited Professional and also holds the Construction Document Technologist credential.


Delvecchio

David Del Vecchio, Architect. David opened his own practice in 1991 soon after obtaining his license here in New Jersey, providing both design and expert services. In his design practice, he works with busy professionals who are seeking a trusted advisor on building design and construction, and won't settle for anything less than excellence. In his expert witness practice, David works with architects, the liability insurance companies who insure them, and the attorneys who defend them, to provide the support to they need to successfully settle or litigate claims made against them. David is a licensed architect in New Jersey, New York, Pennsylvania, Connecticut, Massachusetts, and Florida. Additionally, he is a Certified Interior Designer in New Jersey, a licensed RCS Building Inspector, a LEED© Accredited Professional, and an NCARB certificate holder.

Rodriguez

Miguel Rodriguez, FAIA is a broadly experienced architect with over 35 years in the profession. As firm principal he directly overseas administration, client relations and marketing and is also directly in charge of and participates on each firm project overseeing the activities of the Project Manager and participating in all phases of project development. Mr. Rodriguez is a recognized expert in the American with Disabilities Act, the Florida Accessibility Code for Building Construction, the Uniform Federal Accessibility Standards and the Fair Housing Act and has provided expert advice and testimony on behalf of various clients with respect to the removal of architectural barriers.

 

Inpro Founded in 1979, Inpro® is a global provider of high-performance, design-forward architectural products for building professionals, including door + wall protection, washrooms, expansion joint systems, privacy, elevator protection, architectural signage, and commercial window treatments.

 

Notice

Academies